Proface APL3000B - Node Box PC Uživatelský manuál stáhnout pdf (Strana 33)

PS-3650A / PS-3651A Reference Manual

2-12

 Power-ON Configuration

Specify the setting of power-on operation. Point the cursor to the [Power-ON Configuration] on the

[Advanced] screen and press the [Enter] Key, so that the following screen will be displayed.

Power On Delay

Specify whether to set standby time before the system starts up. Select [Enabled] or [Disabled]. When

[Enabled] is selected, the system waits for 4 seconds before start-up. The factory default setting is [Disabled].

Power On Beep

Specify whether to sound a “beep” upon system boot-up. Select [Enabled] or [Disabled]. The factory default

setting is [Enabled].

• If a USB device such as USB memory is connected to the PS-A when the PS-A is started, the fol-

lowing phenomenon may occur, depending on the device:

• It takes about 1 minute before the OS starts up.

• The PS-A does not recognize the USB device.

These problems may be solved by setting [Power On Delay] to [Enable].

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 106 107

Žádné komentáře

Proface APL3000B - Node Box PC Uživatelský manuál Strana 33