Proface APL3000B - Node Box PC Uživatelský manuál stáhnout pdf (Strana 30)

Chapter 2 System Setup

2-9

 Advanced Chipset Control

Specifies parameters for the chipset. Point the cursor to the [Advanced Chipset Control] on the [Advanced]

screen and press the [Enter] Key, so that the following screen will be displayed.

DDR SDRAM Configuration

Point the cursor to the [DDR SDRAM Configuration] and press the [Enter] Key, so that you can go to the

Memory Setting screen.

ECC Config

Specifies whether the ECC function for memory, which is a function of recovering errors, needs to be used.

This parameter is displayed only when memory with the ECC function is used. Select from [ECC] or [Dis-

abled]. The factory default setting is [Enabled].

ECC Error Type

Specifies the interruption setting when an ECC error occurs. This parameter is displayed only when memory

with the ECC function is used. Select from [None], [NMI], [SMI], or [SCI]. The factory default setting is

[SMI].

SERR signal condition

Specifies error bit(s) for ECC. This parameter is displayed only when memory with the ECC function is used.

Select from [None], [Single bit], [Multiple bit], or [Both]. The factory default setting is [Multiple bit].

SEE



DDR SDRAM Configuration (page2-10)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 106 107

Žádné komentáře

Proface APL3000B - Node Box PC Uživatelský manuál Strana 30