Proface APL3000B - Node Box PC Uživatelský manuál stáhnout pdf (Strana 83)

PS-3650A/PS-3651A Series Hardware Manual

4-14

(9) Insert the Backlight Unit cable to the connector on the inverter board and secure the cable with the cable

clamp.

(10) Return the PS-A unit to the original condition and tighten the screws (6).

(11) Put the Mask Cover back in place and tighten the screws (3).The necessary torque is 0.5N•m to 0.6N•m.

• Be sure to insert the cable into the backlight connector securely. Failure to do so

may damage the connector.

• The cable clamp is used to prevent the cable from being caught inside in the PS-A

unit and possibly damaged. Be sure to insert the cable into the cable clamp before

closing the PS-A unit.

• If any of the screws is missing, check if it fell inside the PS-A unit’s chassis. If the

power is turned ON while a screw is inside, it may cause a malfunction.

• After backlight replacement is completed, turn the PS-A unit’s power ON and check if the screen

display is normal. If the display is not correct, please contact the Pro-face distributor from whom

you purchased the backlight unit.

1 2 ... 78 79 80 81 82 83 84 85

Žádné komentáře

Proface APL3000B - Node Box PC Uživatelský manuál Strana 83